INDUCTOR ID Pad
En stock
Avez-vous des questions sur POWERHAND? Consultez un spécialiste!
Évaluation des clients: 4.47/5(16.608 évaluations)
Compilation d'un ensemble
Informations sur le produit
Avez-vous des questions sur ce produit?
Caractéristiques
La description
- Connect the coil to the coil handle
- Place the coil with its area over the material
- Press the button and guide the coil above the material in a gyratory movement
- After heating of the material, allow the coil to cool off for at least 2 minutes.
NOTE: It is possible to use the coil to remove various adhesive stickers, sealants and gaskets which are stuck to sheet metal or metal – for example in automotive, services etc. The coil is used heating of the base material and thus softening, or alternatively, hardening of the glue, putty, etc. We recommend holding the coil around 5-15mm far from the heated material - it is possible to regulate the required temperature and heating time by changing the distance.
Connect the coil to the coil handle
Place the coil with its area over the material
Press the button and guide the coil above the material in a gyr...
Afficher la description complete
Questions et réponses sur ce produit
Avis sur les produits
Serez-vous le premier à donner un bon avis à ce produit? Vous nous aiderez beaucoup!
Rédigez votre propre commentaire