2K Clear Coat Satin Gloss SprayMax aerosol

2K Clear Coat Satin Gloss SprayMax aerosol

2K Clear Coat Satin Gloss SprayMax aerosol features a silk gloss effect and is extremely scratch resistant. SprayMax 2K clear coat silk gloss is thanks to the 2-components resistant to chemicals, thinner, is gasoline resistant and resistant to extreme weathering. This 2K aerosol clear coat semi-gloss (50% gloss) has a high-quality High Solid quality with a high solids content. This ensures an exceptionally good covering power of the lacquer.

SprayMax 2K Satin Gloss Clear Varnish

This SprayMax 2K Satin Gloss Clear Varnish is of high quality and comes in a professional SprayMax aerosol can. The 2K SprayMax clear coat satin gloss has a fantastic atomization which guarantees a professional end result. Thanks to this professional SprayMax technology, you will spray the same quality as with a paint spray gun in a spray booth! So do not hesitate any longer and spray your car, motorcycle, scooter or other vehicle yourself with this professional 2K clear varnish spray can.

Satin gloss 2K clear varnish over 1K base coat

SprayMax 2K satin gloss is the best spray can clear varnish that can be sprayed over a 1K base-coat. This clear coat can be sprayed over water-based, as well as conventional basecoats. Thanks to the great semi gloss, this clear coat ensures that your color paint gets a silk gloss effect with also the best protection against gasoline, scratches, UV radiation and chemicals.

Characteristics SprayMax 2K clear coat satin gloss

SprayMax 2K spray satin clearcoat has many advantages and strong properties. We would like to list the advantages of this 2-component spray can for you:

• Semi-gloss - silk gloss effect (50% gloss level)
• Equipped with an adjustable SprayMax flat spray valve for a professional spray pattern.
• High-quality, professional (acrylic) automotive paint
• Superior gasoline and acid resistant
• Extremely wear and scratch resistant
• No color deviation
• Also suitable for use at higher temperatures
• Excellent flow and filling
• Completely transparent and does not yellow
• The lacquer is greasy to apply, even on standing parts
• Due to the hard surface easy to sand
• Can be used both for spot repair and for spraying entire parts
• Universally applicable to all 1K and 2K lacquers and also suitable for water-based lacquers
• After activation the 2K aerosol can has a shelf life of 24 hours

How do I use the 2K aerosol clear coat?

Using a 2-component aerosol clear coat works differently than standard 1K aerosols. As the name suggests, this spray can has two different components; namely the clear coat and the hardener, which are still separate from each other. To properly mix the two components together and benefit from the great features of this spray can, you need to perform the following steps correctly.

1. Shake the aerosol can well for 2 minutes.
2. Remove the red push button from the cap on top of the spray can and place it straight (!) on the pin at the bottom of the can.
3. Then press it firmly and shake the aerosol can again for two minutes so that both components can mix and the hardening process is started.
4. After mixing the two components, the prepared two-pack clear coat must be sprayed within 24 hours. Depending on environmental factors (temperature), this may also be longer or shorter. Tip: You can extend the life of the spray can by storing it in the refrigerator immediately after use. However, this can lead to loss of quality for which we do not guarantee.
5. Expiry date: 36 months (not activated). The indication of ultimate shelf life is based on an unused aerosol can with proper storage between 15-25° C and a relative humidity of no more than 60%. The spray can should be stored and transported upright, dry and protected from chemical and mechanical influences. Safety instructions on the spray can as well as all legal storage regulations must be observed.

Application conditions of this silk gloss two-pack varnish

• Can be applied already 10 minutes after the base coat
• Spraying distance: 10 to 15 cm
• Number of layers: 1 to 2
• Evaporation time between layers: 10 to 15 minutes

Drying time of the spray can 2-component clear varnish silk gloss

The drying of SprayMax 2K silk gloss clear coat strongly depends on many factors. Think of the object temperature, ambient temperature, humidity, the sprayed layer thickness, etc. This makes it difficult to indicate how long it will take for your sprayed surface to dry and cure. However, we would like to help you and give you some guidelines, so you know what to take into account.

• Dust dry: approximately 15 minutes at 20ºC
• Can be handled: approx. 80 minutes at 20ºC
• Full dry through: 12 hours at 20ºC
• Complete through drying: 35-40 minutes at 60ºC object temperature
• IR-curing: Allowed

Processing time of this clear coat aerosol

Spraying this 2-component clear coat should be done at standard "room temperatures" (15 to 20 degrees Celsius). We advise against spraying at extreme high or low temperatures at all times. After all, this can lead to loss of quality and the lacquer curing too quickly or slowly.

How much can I do with a can of 2-component clear coat?

This depends greatly on a number of factors. These include the substrate, layer thickness, spraying technique, etc. However, we would like to help you and give you some guidelines so that you know what to take into account.

• 400ml: approx. 0.5 - 0.75 m² per spray can (at approx. 30-50 µm dry film thickness)