The Paint & NonPaint Store, Europe’s most extensive range! Europe’s most extensive range!

Rust-Oleum SuperGrip Anti-SlipStep Edges Exterior

Rating:
% of 100
0 reviews
Order before 10pm, same day shipping
Temporarily out of stock
In stock

This product is in stock and readily available to dispatch. Order before 10PM (Mon to Fri) for same day shipping. Please note that custom made products have longer delivery times.

On order

This product is not in stock. We are expecting stock anytime soon and have taken backorders to secure the stock. The date shown is an indication. Please contact our customer service for an ETA.

Temporarily out of stock

We don’t have stock in our warehouse. We are expecting stock, however this can take a little longer. Once the stock arrives, the product will be available in our shop. Please contact our customer service for an ETA.

€52.37 €43.28 Retail price €61.61
Questions about Rust-Oleum? Speak to a product specialist!
Consumer rating of: 4.63/5(15.575 reviews)
Configure your bundle
SAFETY GRIP Anti-Slip Protection Tape
Rust-Oleum SuperGrip Anti-SlipStep Edges Exterior
Rust-Oleum Anti-Slip Spray in spuitbus 500ml
Rust-Oleum SuperGrip Anti-Slip Spray in 500ml Aerosol
Oploopmat voor de achterklep van trailers en vrachtwagens
Pro-Plus Foldable Car Tyre Anti-Slip Mat with Grip and Traction per set of 2 pieces
discount on the accessories
Retail price
Rust-Oleum SuperGrip Anti-SlipStep Edges Exterior
Rust-Oleum SuperGrip Anti-Slip Spray in 500ml Aerosol
Product information
Questions about this product?
Specifications
SKU conf_RO-SGTNE
Heat resistant 80° C
Measurement 55mm
Brand Rust-Oleum
All specifications
Packaging per stuk
Category Anti-Slip
View all details

Specifications

SKU conf_RO-SGTNE
Heat resistant 80° C
Measurement 55mm
Brand Rust-Oleum
Packaging per stuk
Category Anti-Slip
Description

Rust-Oleum SuperGrip Anti-Slip Step Edge Outdoor is a heavy duty preformed Anti-Slip step edge with an extra coarse surface for exterior use providing a corrosion resistant surface for damaged, worn or slippery steps. Easy to fix with glue and screws. Ready to fix Anti-Slip panels. Outlives all other Anti-Slip applications. Easy to fix with glue and screws. Heat resistance from -20° C. to +80° C

The Step Edge is also available in less coarse ‘interior’ version.

  • Available colours:
    • White
    • Yellow
  • Available sizes:
    • 1000mm x 55mm x 55mm
    • 1500mm x 55mm x 55mm
    • 2000mm x 55mm x 55mm
    • 3000mm x 55mm x 55mm

SAFETY
When installing Anti-Slip panels, standard personal protective equipment should be worn as a minimum. These include a dust mask, safety goggles, heavy-duty gloves and overalls. Dry fit all Anti-Slip panels to ensure that they fit freely and that they sit flat down on to the surface. Drill the fixing locating holes in all the panels. Whilst individual circumstances will vary, the following can be used as a guide:

INSTRUCTIONS FOR USE
The items are generally glued and screw fixed. Adhesive Mastic is ideal since it will make up minor deviations in the substrate and prevent the panels drumming or rocking. The Adhesive Mastic should be applied to sound, clean dry surfaces if it is to be the only method of fixing in lightly trafficked areas. If application is to damp, dirty or friable surfaces or in very cold weather, use the Adhesive Mastic to bed the Anti-Slip panel into place and then always screw fix. Screw fixings are generally made at about 600mm intervals.

TRIMMING
The Anti-Slip material is quite tough to cut. So if required, the Anti-Slip panels can be trimmed on site to suit using an industrial jigsaw and appropriate cutting blades (Bosch “T101 A1F” or similar are ideal).

FIXINGS
If mechanical fixing is required, the following may be used as a guide. - To timber: No.8 x 30mm zinc plated or stainless steel screws. - To steel plate: No.8 x 20mm self-tapping pan head Pozi stainless steel screws or No.8 x 20 mm self drilling pan head Philips zinc plated screws. - To concrete: No. 8 x 30 mm zinc plated or stainless steel impact anchors (Hilti HPS-1 or similar). - To open mesh: Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.

COUNTERSINKING
When drilling holes in the panels we do not recommend countersinking

PREPARATION
Very little preparation of the substrate is required. It should be reasonably clean and dry if the Adhesive Mastic is to be the only means of fixing. Badly dished or holed concrete etc should ideally be filled. The Adhesive Mastic will take up minor undulations and imperfections.

DRILLING
Hold the Anti-Slip panel in place and drill through the panel and into the substrate. A rawlplug will probably be required in a concrete base. The drill hole in the panel does not need to be larger than that drilled into the substrate.

Expand full description
Rust-Oleum SuperGrip Anti-Slip Step Edge Outdoor is a heavy duty preformed Anti-Slip step edge with an extra coarse surface for exterior use providing...
See full description
Description

Rust-Oleum SuperGrip Anti-Slip Step Edge Outdoor is a heavy duty preformed Anti-Slip step edge with an extra coarse surface for exterior use providing a corrosion resistant surface for damaged, worn or slippery steps. Easy to fix with glue and screws. Ready to fix Anti-Slip panels. Outlives all other Anti-Slip applications. Easy to fix with glue and screws. Heat resistance from -20° C. to +80° C

The Step Edge is also available in less coarse ‘interior’ version.

  • Available colours:
    • White
    • Yellow
  • Available sizes:
    • 1000mm x 55mm x 55mm
    • 1500mm x 55mm x 55mm
    • 2000mm x 55mm x 55mm
    • 3000mm x 55mm x 55mm

SAFETY
When installing Anti-Slip panels, standard personal protective equipment should be worn as a minimum. These include a dust mask, safety goggles, heavy-duty gloves and overalls. Dry fit all Anti-Slip panels to ensure that they fit freely and that they sit flat down on to the surface. Drill the fixing locating holes in all the panels. Whilst individual circumstances will vary, the following can be used as a guide:

INSTRUCTIONS FOR USE
The items are generally glued and screw fixed. Adhesive Mastic is ideal since it will make up minor deviations in the substrate and prevent the panels drumming or rocking. The Adhesive Mastic should be applied to sound, clean dry surfaces if it is to be the only method of fixing in lightly trafficked areas. If application is to damp, dirty or friable surfaces or in very cold weather, use the Adhesive Mastic to bed the Anti-Slip panel into place and then always screw fix. Screw fixings are generally made at about 600mm intervals.

TRIMMING
The Anti-Slip material is quite tough to cut. So if required, the Anti-Slip panels can be trimmed on site to suit using an industrial jigsaw and appropriate cutting blades (Bosch “T101 A1F” or similar are ideal).

FIXINGS
If mechanical fixing is required, the following may be used as a guide. - To timber: No.8 x 30mm zinc plated or stainless steel screws. - To steel plate: No.8 x 20mm self-tapping pan head Pozi stainless steel screws or No.8 x 20 mm self drilling pan head Philips zinc plated screws. - To concrete: No. 8 x 30 mm zinc plated or stainless steel impact anchors (Hilti HPS-1 or similar). - To open mesh: Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.

COUNTERSINKING
When drilling holes in the panels we do not recommend countersinking

PREPARATION
Very little preparation of the substrate is required. It should be reasonably clean and dry if the Adhesive Mastic is to be the only means of fixing. Badly dished or holed concrete etc should ideally be filled. The Adhesive Mastic will take up minor undulations and imperfections.

DRILLING
Hold the Anti-Slip panel in place and drill through the panel and into the substrate. A rawlplug will probably be required in a concrete base. The drill hole in the panel does not need to be larger than that drilled into the substrate.

Product Q&A
No frequently asked questions found for this product. View all topics in our FAQ.
All frequently asked questions
Product reviews
There are currently no reviews. Be the first to review this product!
Write Your Own Review
You're reviewingRust-Oleum SuperGrip Anti-SlipStep Edges Exterior
Your Rating
© Car Repair Online Products