Rust-Oleum SuperGrip Anti-Slip Step Decking Strips
Rust-Oleum SuperGrip Anti-Slip Step Decking Strips is the quick and easy solution for dealing with slip issues associated with standard timber decking. Made from tough fibreglass with anti-slip grit top surface. These strips are the ideal solution to help with slippery decking areas. The GRP pultruded strips come complete with pre-drilled holes and screw fixings. Simply lay the strips on top of your decking and screw through the pre-drilled holes into the timber to secure the strips in place. It couldn't be easier. Simply crew fixed tonto the existing timber through pre-drilled holes. (Screws will be provided). Easy to fix with screws. Heat resistance from -20° C. to +80° C
Each decking strip is 3mm thick with each edge chamfered so as to not cause a trip hazard. The grit top surface is made from a tough hard wearing aggregate that offers extreme slip resistance in most weather conditions.
Advantages:
- Extremely durable anti slip surface
- Easy to install
- Waterproof and Rot proof
- Pre-drilled for screw fixing (screws included)
- Choice of 3 widths and 2 lengths
- Available in different colours
- Suitable for domestic and commercial use
Available colours:
- Black
- Beige
Available sizes:
- 50mm x 1200mm
- 90mm x 1200mm
- 120mm x 1200mm
- 50mm x 2400mm
- 90mm x 2400mm
- 120mm x 2400mm
Decking Strips – Pre-drilled hole configuration
- 50mm Wide
- 1200 mm – one row of 7 holes (6 mm diameter), 50mm in from each end and then approx. 183 mm centres. Supplied with zinc plated wood screws.
- 2400 mm – one row of 11 holes (6 mm diameter), 50 mm in from each end and then approx. 230 mm centres. Supplied with zinc plated wood screws.
- 90mm Wide
- 1200 mm – one row of 7 holes (6 mm diameter), 50 mm in from each end and then approx. 183 mm centres. Supplied with zinc plated wood screws.
- 2400 mm – one row of 11 holes (6 mm diameter), 50 mm in from each end and then approx. 230 mm centres. Supplied with zinc plated wood screws.
- 120mm Wide
- 1200 mm – two row of 5 holes (10 total), (6mm diameter), 50 mm in from each end and then approx. 275 mm centres. Supplied with zinc plated wood screws.
- 2400 mm – two row of 5 holes (10 total), (6 mm diameter), 50 mm in from each end and then approx. 287mm centres. Supplied with zinc plated wood screws.
Safety
When installing the product, standard personal protective equipment should be worn as a minimum. These include a dust mask (or similar), safety goggles, heavy duty gloves and overalls. If required, the product should be cut in a well ventilated area or close to extraction points. Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.