PROFI-STRIPPER Paint Stripper Gel - Professional
PROFI-STRIPPER 1K Paint Stripper is a very strong gel 1K lacquer stripper based on methylene chloride, formic acid, ethane and dodecyl benzene sulfonic acid. This gel paint stripper is very strong and therefore removed thick layers of paint.
- Paint stripper suitable for cold removing of a variety of paints, both air drying and muffle paints.
- Is pure and used as a dip stripper. Contains a wax which separates at the surface, so that evaporation of the methylene chloride is prevented.
- Not flammable and does not attack metals such as steel, aluminium or copper.
- Requires no separate regaining.
- Application: Dip or lubricate the objects for 5-60 minutes in the liquid until the paint has been released. Rinse with water if possible supported by brushing and spraying.
- Safety: Based on methylene chloride which is harmful if inhaled. The vapour should not come in contact with open flames or glowing surface. When it is, it should use adequate ventilation to be present. One needs goggles and plastic gloves to wear, since contact with skin and eyes should be avoided. If this takes place anyway, then rinse well with water.
The PROFI-STRIPPER remover is available in a gel form for immersion and spray.
Mandatory measures PROFI-STRIPPER Paint Stripper Gel - Professional
Since 6 December 2011, a new measure has been introduced regarding the use of dichloromethane. In short it comes down to the following:
The professional user may continue to use Dichloromethane if it meets the new conditions. The user must be aware that the product contains Dichloromethane and that a mechanical ventilation system (for example a paint mixing room, spray booth, extraction wall etc.) must be used to prevent dichloromethane vapors.
Before we can supply products containing Dichloromethane like PROCA-STRIP Ph-Neutral Paint Stripper or PROFI STRIPPER 1K and 2K Liquid Paint Stripper, we are forced by REACH and CLP (Inspection of the Environment and Transport) to hand over the attached document for you to sign. This states that you are fully aware that the above products may only be processed in a ventilated area.
We kindly request you to fill in the form on this product page, sign it and send it to customerservice@nonpaints.com
After receipt we will ship your order.
