High quality lacquer for the treatment of treated and untreated wood, metal, aluminium, glass, stone, eternit, pottery and various types of plastic.
Product Features
- Very high coverage and filling
- Lasting colour and lasting shine
- Scratch and shock proof
- Resistant to petrol, chemicals and weather influences
- Good corrosion protection
- Excellent adhesion
Features
- Base: Alkyd
- VOC content: Approximately 83% w / w
- Solids: Approximately 17% w / w
- Gloss: High gloss, satin and matte
- Yield: 1.25 to 1.75 m² Approximately 0.5 m²
- Dust dry: After 30 to 60 minutes
- Touch: After 3 to 4 hours
- Hardened / recoat: After 24 hours
- Heat resistant: Up to 110 ° C
User
- Before use, read the instructions on the package and follow them.
- The surface must be clean, dry and free of grease.
- Remove loose old paint and rust , then sand and prime with a suitable substrate for MoTip primer.
- Sand the soil layer light after drying (600 grit).
- The surface must be clean, dry and free of grease.
- The aerosol at room temperature.
- Ideal processing temperature is 15 to 25 ° C.
- Before use, shake the aerosol for 2 minutes and spray a sample.
- Distance to the to be treated surface approximately 25 to 30 centimetres.
- Apply the paint in several thin layers.
- Prior to the application of the next layer, again shake the aerosol.
- Even if the paint is cured, not spray with acrylic lacquer or nitro-cellulose lacquer.
- After use, clean the valve (aerosol upside down and the nozzle for approximately 5 seconds).
- The drying time depends on the ambient temperature, humidity and film thickness.
