Colormatic Finish Control Spray in Aerosol

Transparent Microfoam

ColorMatic finish control spray provides optimum results after polishing the clear coat and topcoat, where appropriate. The micro foam removes oily and waxy polish residue and makes remaining sanding marks visible.

Quality and properties

• Removes oily and waxy polish residue
• Makes remaining marks visible
• Easy and fast application
• Mild, non-aggressive cleaning agent
• Very time saving
• Used after polishing sanded coated surface (dust inclusions, paint defects, frosted edges)

Physical and Chemical Data

• Basis of binder:Acrylic
• Colour: transparent, foaming
• Smell:solvent
• Efficiency: Depending on consistence and colour of the ground: 400 ml are sufficient for approx. 2,0 m²
• Substrate: Sanded and polished clearcoat or topcoat surface
• Drying-time (at 20°C, 50% relative air humidity):
  - Dust-dry: after approx. 10 minutes
  - Dry to touch: after approx. 30 minutes
  - The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature resistance: to 80°C
• VOC-value:89,7g

Using instructions

1. Before use, carefully read and observe the warning texts on the label!
2. Apply a thin layer on the polished surface
3. Wipe dry with a clean, soft cloth (do not leave to dry)
4. If sanding marks or holograms are visible, polishing is required
5. Repeat above procedure until results are perfect
6. For professional use only

Hints concerning application

• ColorMatic finish control spray exposes even holograms that have developed during polishing work.
• Just use after polishing as instructed.