2K Rapid Primer Filler SprayMax aerosol
2K Rapid Primer Filler SprayMax aerosol is an isocyanate free and fast drying primer with high filling capacity. SprayMax 2K primer filler spray is a professional primer that fills uneven surfaces, allowing you to sand the surface to a smooth and tight end result.
2K filling primer that adheres to any surface
This 2K filler primer from SprayMax has excellent adhesion to any surface and material. Think of steel, aluminum, galvanized plates, putty and old paint layers. Thanks to the 2 components the filler provides a perfect and tight flow. As a result, the filler dries considerably faster than other 2 component primers, making it quicker to sand.
Available in a spray can of 250ml and 400ml
SprayMax 2K Rapid Primer FIller is available from us in 250ml and 400ml spray cans, allowing even more precise adjustment to the specific situation and needs on site. The 400ml spray can is suitable for spraying parts or complete refinishing of your car, motorcycle, scooter or bicycle. Do you only need a small amount? Then the 250ml small pack spray can is ideal for you. This 250ml 2-component rapid filler primer is widely used for spot repair work or spraying small pieces and parts.
Substrates (cleaned and sanded)
- Bare metal
- Polyester putty
- Old coatings
Preliminary treatment
- If necessary, sand the surface thoroughly. Before roughening the surface we recommend cleaning it thoroughly with SprayMax Silicone Remover
How does a 2K spray can work?
- Shake the aerosol for 2 minutes
- Remove the red cap from the cap
- Turn the spray can 180° and place the red cap on the pin on the bottom of the spray can
- Place the aerosol can with the cap upside down on a solid surface
- Press the red release button with the palm of the hand until it stops
- Shake the aerosol can thoroughly for 2 minutes
- The spray can is now ready for use
Spraying
- Number of spray coats: 2-3
- Layer thickness per spray layer: 30 μm
- Evaporation time between coats: 5-10 minutes (depends on temperature)
Drying times
- Wet-on-wet recoatable: after approx. 20 min air drying time
- Sandable: after 1 hour at 20°C and 30 minutes at 60°C
- IR drying possible
Processing time
- 24 hours at 20° C room temperature
- Processing time depends on the ambient temperature
- Higher temperatures lead to shorter and lower temperatures to longer processing times
Further processing
- Can be oversprayed wet-on-wet after air drying for approx. 20 min
- Wet sanding with P800
- Machine sandable with P400
- Recoatable with all common K + 2K lacquers
Consumption per spray can
- 250ml: approx. 0.3 m² - 0.6 m²
- 400ml: approx. 0.5 m² - 1 m²
-
Excellent product and serviceGreat product easy to use - very smooth finish and drys fast with good build. Excellent spray pattern and just perfect for small projects. I would use it again.
Posted on